S600 Fiber and copper multi tester is a series of portable instruments for operation and maintenance testing designed for communication telecom operators. S600 Fiber and copper multi tester integrates xDSL, DMM, TDR, optical power meter, red light, telephone, tracing, Bluetooth, charging and other functions.
 
Product Features
 
1, 320*480 3.5 inch LCD
2, Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2 (30a, 35b profile is optional)
3, Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)
4, Support VLAN, Vectoring, Compliant with all known DSLAMs
5, Supports Modem emulation and simulating login to Interne
6, Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)
7. Rechargeable Li-ion Battery
8. Support optical power meter, VFL function
9. Support cable tracing, check line sequence, landline telephone function
10. Support cable fault locator (TDR) function
 
Product Parameters
xDSL Index
xDSL test main functions
Physical Layer Info
 
PPPoP Dial
FTP Client, Fixative IP
Network Layer Test
Modem Emulation
PING
Support VLAN,HLOG,QLN
Error Code Statistics
Bit Graph Display
BPT /SNR Data
Modem Parameter Setting(VPI/VCI)
ADSL Index
Standards
ITU G.994.1 (G.hs), ITU G.992.5, ITU G.992.5 Annex L. The max distance which can be connected is 6.5km. Be compatible with ADSL, ADSL2 and READSL.
Attenuation:
0~63.5dB
Noise margin
0~32dB
Upstream Channel Rate (interweaved / fast mode)
0~1.2Mbps
Downstream Channel Rate (interweaved / fast mode)
0~24Mbps
The modulating bits in the DMT sub-channel
0~15 and each sub-channels’ frequency points
The number of error codes
CRC, HEC, FEC, NCD, OCD
Other Parameters
The output power of DSL
 
It can display every condition of the DSL line: lost signal and shutdown of link
VDSL2 Index
Standards
ITU G.993.2(VDSL2).Be compatible with ADSL2+, ADSL standard.
Upstream Channel Rate (interweaved / fast mode)
0-100M
Downstream Channel Rate (interweaved / fast mode)
0-100M
The modulating bits in the DMT sub-channel
0~15 and each sub-channels’ frequency points
The number of error codes
CRC, HEC, FEC, NCD, OCD
Other Parameters
The output power of DSL
 
It can display every condition of the DSL line: lost signal and shutdown of link
DSLAM information
Error seconds
INP pulse protection
SNR channel figure
Channel noise margin figure
Support profiles:
Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a
DMM Test Index
DC Voltage
-400 to 400 V; Resolution: 0.1V
AC Voltage
0 to 290 V
Capacitance
0 to 1000nF; Accuracy: 0-10nF: ±2nF, 10nF-1000nF: ±2 %±2nF
Loop Resistance
0 to 20KΩ; Accuracy: 0-100: ±3%±4Ω, 100-500: ±3%, 500-20 KΩ: ±2%
Insulation Resistance
0 to 50MΩ; Accuracy: 0-1.0M: ±0.1 MΩ, 1.0-30M: ±10%±0.5 MΩ
TDR Index
General specifications
Check line mix and break fault.
 
Auto and manual distance test
Test Range
8km(4km,16km,32km is optional)
Highest resolution
1km
Dead Zone
0m
Power consumption
1W
VOP Adjusting range
100-300 m/us
Distance test accuracy
≤1m
Pulse test voltage range
≥30V
Cable Tracking Index
Test cable type
Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.
Line status test
Determine open or short circuit
Voltage polarity detection
Positive and negative of DC voltage
Distance of signal transmission
No less than 3km
DC Voltage
No more than 48V
Check Line Sequence Index
Function
Support generate network line signal to view the network check line sequence with the receiver
Feature
Easy to operate: determine the line sequence by receiving side lights order
Optical Power Index
Wavelength range(nm)
800~1700
Photosensing material
InGaAs
Power test range(dBm)
-70~+10 or -50~+26
Error range
±5%
Display distinguishability
Linear display: 0.1%;logarithmic display: 0.01 dBm
 Adapters
FC, ST, SC
VFL Index
VFL
FP-LD
Wavelength
650nm±20nm
Output power
1mw/3mw/5mw/10mw (optional）
Connector
2.5mm universal adapter(SC, FC, ST)
Working mode
CW or 2Hz modulation
Applicable fiber
SM / MM